-
Empty cart
No products in the cart.
Return to Shop
Frequently asked questions
Let us show you how your product come to life.
Step 1: Gather Your Materials
- DTF Transfer: Ensure your transfer is ready and printed.
- Garment: Pre-wash and dry your shirt to remove any sizing.
- Heat Press: Set it up in a well-ventilated area.
- Teflon Sheet or Parchment Paper: To protect the transfer and garment.
- Heat-Resistant Tape (optional): To secure the transfer.
Step 2: Preheat the Heat Press
- Set Temperature: Typically around 320°F (160°C), but check the transfer’s instructions for specifics.
- Set Time: Usually about 15-20 seconds.
- Pressure: Firm pressure is generally recommended.
Step 3: Prepare the Garment
- Position the Garment: Place it on the heat press to ensure it’s smooth and wrinkle-free.
- Pre-press the Garment: Close the heat press for about 5 seconds to eliminate moisture and wrinkles.
Step 4: Position the DTF Transfer
- Place the Transfer: Position the DTF transfer (printed side down) where you want it on the garment.
- Secure (if needed): Use heat-resistant tape to hold it in place.
Step 5: Press the Transfer
- Close the Heat Press: Apply firm pressure and set the timer.
- Press for Time: Wait for the designated time (15-20 seconds).
Step 6: Cool Down
- Open the Press: Carefully lift the heat press.
- Peel the Transfer: Depending on the transfer instructions, either peel the transfer hot or cold. Generally, DTF transfers are peeled cold.
Step 7: Final Press (optional)
- Re-press the Transfer: For added durability, you can place a Teflon sheet over the transfer and press for an additional 5-10 seconds.
Step 8: Let it Cure
- Allow to Cool: Let the garment cool completely before handling or washing.
Additional Tips
- Test First: If it’s your first time, test on a scrap piece or similar fabric.
- Follow Manufacturer’s Instructions: Always check the specific guidelines for your DTF transfers, as temperatures and times can vary.
By following these steps, you’ll achieve a professional-looking application with your DTF transfers!
Step 1: Wash Before Wearing
- Pre-wash: If possible, wash the shirt before wearing it for the first time to remove any residual chemicals from the printing process.
Step 2: Turn Inside Out
- Turn the shirt inside out: This helps protect the print during washing.
Step 3: Choose the Right Washing Settings
- Gentle cycle: Use a gentle or delicate cycle on your washing machine.
- Cold water: Always wash in cold water to preserve the print and fabric.
Step 4: Use Mild Detergent
- Choose a mild detergent: Avoid bleach or harsh chemicals that could damage the print.
Step 5: Avoid Fabric Softeners
- Skip fabric softeners: They can interfere with the print’s adhesion.
Step 6: Air Dry
- Air dry the shirt: Hang it to dry or lay it flat. Avoid using a dryer, as high heat can damage the print.
Step 7: Ironing (if needed)
- Iron inside out: If you need to iron, turn the shirt inside out and use a low heat setting. Avoid direct contact with the print.
Step 8: Storage
- Store properly: Keep the shirt in a cool, dry place, away from direct sunlight to prevent fading.
Additional Tips
- Avoid dry cleaning: This can damage the DTF print.
- Limit exposure to heat: Avoid placing the shirt near heat sources, as this can warp the print.
By following these steps, you’ll help ensure your DTF shirts remain vibrant and last longer!
1. Cotton
- 100% Cotton: Excellent adhesion and vibrant colors.
- Cotton Blends: Works well with blends like cotton/polyester.
2. Polyester
- 100% Polyester: Great for bright colors and durability.
- Polyester Blends: Works well, but keep an eye on temperature to avoid scorching.
3. Cotton/Polyester Blends
- Ideal for a wide range of applications, offering good results.
4. Canvas
- Suitable for bags, shoes, and other items, providing a sturdy surface for transfers.
5. Rayon
- Can work, but be cautious with the heat to avoid damage.
6. Nylon
- Generally okay, but test a small area first, as nylon can be sensitive to heat.
7. Fleece
- Great for sweatshirts and jackets; ensure even pressure and heat distribution.
8. Performance Fabrics
- Moisture-wicking and athletic materials can be used, but verify compatibility first.
Important Considerations:
- Test First: Always do a test press on a scrap piece if you’re unsure about a fabric.
- Temperature Sensitivity: Some synthetic fabrics may require lower temperatures to avoid damage.
- Fabric Care: Ensure that the fabric is clean, pre-washed, and free of any treatments that could affect adhesion.
By following these guidelines, you can successfully heat press DTF transfers onto various fabrics!
Where do orders ship from?
- All orders are shipped from San Dimas, California, 91741.
How long does it take for orders to ship?
Orders typically ship within 72 hours. If you need your order sooner, rush shipping options are available.What are the shipping costs?
We offer a flat shipping fee of $8 across the USA.Can I arrange for local pickup?
Yes, local pickup can be arranged. Please email us at LetsPressDTF@Gmail.com if you are in the San Dimas, CA area and wish to arrange a pickup.How will I receive my tracking information?
Once your order has shipped, you will receive a tracking number. You can track your order here.Need more help?
If you have any further questions or need assistance, feel free to utilize our live chat or email us at LetsPressDTF@Gmail.com.